About the 620STD 0450 400 0020 UK ENW 0000 000 B0 000 000
The Eurotherm 620STD 0450 400 0020 UK ENW 0000 000 B0 000 000 is a drive from the 620 Vector series. AC induction motors featuring analog setpoints and logic control systems are the best suited uses for this drive. High performance speed control is a highlighted feature of this 45kW unit. Input voltages fed to the device can nominally rate between 380 and 460 VDC. Compliant with European standards, this model has a set frequency of 50Hz.
Expanded I/O capabilities are a major feature of this drive. 620STD 0450 400 0020 UK ENW 0000 000 B0 000 000 includes both analog and 24VDC digital I/O. Two analog outputs and three digital outputs are integrated into the drive. An additional nine digital inputs and five analog inputs are designed into the unit. On board braking includes a factory installed brake power switch. The drive is complete with a MMI, or a man machine interface, system including an alphanumeric keypad. Access to system parameters, alarms, and diagnostic information is easily available using this MMI system.
Drive preservation is dependent upon following manufacturer provided installation and storage parameters. A IP20 mounting panel enclosure surrounds 620STD 0450 400 0020 UK ENW 0000 000 B0 000 000, protecting it from dirt and debris. Ambient temperatures on operating lines should be maintained between 32℉ (0℃) and 122℉ (50℃) to prevent overheating. An illustrated guide to wiring and installing the drive is available in the series manual as well as the device datasheet. The manufacturer, Eurotherm, was the original technical support provider for this device.
Our knowledgeable sales team at AX Control is ready to assist with all of your automation needs. For current prices and availabilities on all parts and repairs, please contact our office by phone or email.
